18. Reboot

If you click the “Reboot” entry in the tree, you will receive the warning message shown in Figure 18a and your browser color will change to red to indicate that you have selected an option that will negatively impact users of the FreeNAS® system.

Figure 18a: Reboot Warning Message

reboot.png

If a scrub or resilver is in progress when a reboot is requested, an additional warning will ask you to make sure that you wish to proceed. In this case, it is recommended to “Cancel” the reboot request and to periodically run zpool status from Shell until it is verified that the scrub or resilver process is complete. Once complete, the reboot request can be re-issued.

Click the “Cancel” button if you wish to cancel the reboot request. Otherwise, click the “Reboot” button to reboot the system. Rebooting the system will disconnect all clients, including the web administration GUI. The URL in your web browser will change to add /system/reboot/ to the end of the IP address. Wait a few minutes for the system to boot, then use your browser’s “back” button to return to the FreeNAS® system’s IP address. If all went well, you should receive the GUI login screen. If the login screen does not appear, you will need physical access to the FreeNAS® system’s monitor and keyboard so that you can determine what problem is preventing the system from resuming normal operation.

Previous topic

17. Log Out

Next topic

19. Shutdown

This Page